Question:

The needles on my Janome 9102D keep breaking

by  |  earlier

0 LIKES UnLike

I had a problem with the overlocker just not doing anything right. I took it for service and then the thread in the bottom looper keep breaking free. That seemed to pretty well cure itself and in it's place the right hand needle kept breaking. It seems to be coming down in front of the upper looper rather than behind which then drives it into the presser foot. Then last night the left hand needle started to break or bend. I am careful to ensure they are seated properly but having replaced a dozen needles yesterday I am at my wits end.

 Tags:

   Report
Answer The Question I've Same Question Too
Please Login to view 0 answers to this question
SIMILAR QUESTIONS
CAN YOU ANSWER?
  • Overlocker machine janome harmony 9102d
    I have spent hours threading and re-threading the machine according to the diagrams in my manual, but can't seem to...
    Posted: earlier
  • Janome 9000 needle not moving
    hi i have a problem with my janome, there is power but the needle wont move or it wont sew...even just trying to th...
    Posted: earlier
  • Needle jams and breaks off
    When I attempt to sew, my needle jams after the 3rd or 4th stitch. When I manually rotate the wheel to loosen it an...
    Posted: earlier
  • Needle bent - thread break error
    My wifes PE-150 starts to embroid , after a few stitches it comes up with the "needle bent or thread break error" h...
    Posted: earlier
  • Needle breaks
    I have no clue as to why my needle breaks unexpectedly. I have been doing a simple project using a cotton fabric
    Posted: earlier
View All
You're reading: The needles on my Janome 9102D keep breaking

Question Stats

Latest activity: earlier.
This question has 0 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.
Register Now