Toyota Corolla 09' Remote start wiring notes......?

Question

I just need the wire color and locations for the remote start.

i already have all the other wires

i just need.

all accessories,

all ignitions,

and starter.

and just a quick question...(doesn't need to be answered)

since the starter output wire of the viper relay is HUGE, does that mean its ganna send out alote of current....

i ask because the starter wires coming from the key cylinder are 20g and i dont know if sending to much current into them would cause any damage or pop a fuse.....

just curious.

need the answers fast,

thanks

Answer 1

12 volt = Blue

Second 12 Volts = Red

Starter = Black

Second Starter =  White

Ignition = Brown

Second Ignition = Green

Third Ignition = N/A

Accessory = Gray

If you dont want to have problems with poping fuses(which you will if you dont do this) you will run a suffeciant size wire straight from the battery to your primary remote start relays 12 volt section. there isnt a problem with hooking the outputs for the remote start to the thin ignition wires but there is a problem hooking the 12 volt input section to the constant at the ignition switch cuz its only 7.5 amps. hope this helps