Wasup peeps? N-E body know about digital cameras and how to hook it up to a pc?

Question

Wasup peeps? N-E body know about digital cameras and how to hook it up to a pc?

Answer 1

If the camcorder uses miniDV or Digital8 tape, it uses the DV port (this is a 4-pin) and connects to the firewire port (not USB) of your computer. If you don't have a firewire port, install one. The port installed on the computer will be most likely 6-pin... but can be 4-pin. It depends what you have or decide to install. You need firewire400 (Also known as i.Link or IEEE1394a). USB will only be used for web streaming (if the camcorder has the feature) or for transferring stills.

If the camcorder is hard drive or flash memory based, it should mount using USB and appear as a USB mass storage device. If it does not, you need to install the drivers available on the CD in the box or download from the camcorder manufacturer.

If the camcorder is DVD based, you will need to have a drawer loading DVD drive on your computer and you will rip the DVD with something like HandBrake.

If the camcorder is analog (hi8), you will need to get a Analog/Digital bridge from Pinnacle or Canopus.

If the camera is for taking stills and happens to take highly compressed videos, take the memory card out of the camera and use a card reader to transfer the videos to the computer.

Answer 2

yes

Answer 3

Every camera is different.  If you don't have an owner's manual, go to the website of the company that made it and you should be able to download a copy.

Answer 4

The digital camera comes with a special usb cable that connects the camera to the computer.

Answer 5

your digital camera should come with a usb cord...plug it into ur camera and computer and ur set...