have followed these instructions. After hitting these keys the only lights that go on are from the previous setting. The machine then goes into that cycle (wash - rinse etc). The problem is that the indicator or timer to allow for the water to drain is not functioning is leaving 2 inches of soapy/dirty water in the bottom of the dishwasher. I see that during the rinse cycle, and probably the wash cycle, water is added to the maching and some drains out. I can see it. What sensor/indicator/timer determines that the tub is empty or needs to be emptied and stays on long enough to allow the water to pump out? Remember, the pump was replaced
Tags: