We have an above ground pool with a blow up ring and it has a small hole we cannot find! Any suggestions???

Question

We have an above ground pool with a blow up ring and it has a small hole we cannot find! Any suggestions???

Answer 1

Yep!    I sure can!   Get a 1 quart plastic container

place a cup of liquid dish soap  to a1/4 cup of water.

Get a blue magic marker. and a cloth head dishbrush .

One that looks like Raggedy Ann met the Rasta man.

Use this to apply the soap mixture to the ring.

Go slowly and make sure the ring is filled.  Apply the

soap to the ring and look for little bubbles Find bubbles,

mark the leak with the blue magic marker. Wash the area with clear water wipe dry then let the area dry to air.  Prep the area with an alcohol prep or cottonball saturated with alcohol let dry. you should have a repair kit that was

included with the pool when you bought it if not you can purchase them at any hardware store where they

sell waterbed repair parts.  Apply the vinyl glue supplied

to the patch and the pool. Hold in place until the

patch dries with strands of scotch tape. Carefully

peel back in about 2 hours wait  1 day before reinflating.

Answer 2

Put some dish soap in a spray bottle and go around the entire ring making sure to spray every inch.You will see the bubbles.

Answer 3

Yeah sure, use dishsoap around it after blowing it up, once using pressure on the ring the soap will make soap bubbles where the hole is.  Thanks for asking.