What inexpensive bindings should i put on my k2 silencer skis?

Question

What inexpensive bindings should i put on my k2 silencer skis?

Answer 1

K2 is one of the best skis & I wouldn't think of a real expensive binding. The cheap ones don't hold up long & they will break. If I were you, I'd check out the brand "Salomon," I think everything they sell in the ski industry is the best. They everything from boots, bindings to clothing. They have wide price range to choose from in bindings but I would be careful in buying the cheapest. Remember, a good binding will last a lifetime, so the little extra money is worth it & you'll ski much better. I've skied expert for over 35 yrs. & I have only bought three different bindings; that's how long a good binding can last, especially when your a hard or expert skier. You don't want the coming loose a lot & this can happen if you try the cheapest priced binding unless it's on sale. Check any ski shop or a sporting goods store that carries ski equip. You can also buy them on-line using www.amazon.com & they're cheap there & so is the shipping & you'll get them in 3 to 5 days & any ski shop will mount them on your skis. I don't why you'd look for a cheap binding since you're skis are so excellent. Good Luck!!!

Don

Answer 2

It depends on what you are doing,  a good range of DIN setting is vital, ease of entry, and exit.  Reliable release in all directions,  it seems to come down to one of 3 brands,  Marker, Tyrolia, Salomon, each model has different features,  the Tyrolia features some heel release to the side as well as straight forward, a little bit of extra security.  All are good brands and choose the features you want.  If you are Parkin or steeps and bumps, go with the top of the line.  Otherwise you might save $20 bucks a pair and go with a slightly less expensive binding.  

  In general you need to have a binding that will last as long as you own the skiis.  This is not the last pair you'll buy is it?  Spend the extra few bucks and save a bad leg injury.

Answer 3

Because your doing park (im assuming by the twin tips), I would suggest getting a binding system that is not piston run...I would suggest the Salomon z-10 binding, closely related to the z 12, this will give your a light responsive binding for about 200 dollars...Also i don't know if this is your first twin tip, but if it is, you cannot install your bindings like a normal ski with a plate, you actually have to drill into the skis, i would suggest having a professional do it..hope that helps, have fun

Answer 4

Dependable choices:

Look PX12

Rossignol Axial 2 120 (same binding as the Look PX12)

Tyrolia Mojo 11/15

Lightweight choice:

Salomon Z-10/Z-12

New king:

Marker Jester/Baron

Stay away from the other Marker bindings unless you like premature releases.  Twincam-style Marker toepieces are weak at lateral retention.  People who have them and ski aggressively have to compensate by cranking up the DIN, which of course increases the risk of hurting your leg in every other release direction.

Answer 5

I think there's a number of good brands, etc. but don't emphasize "cheap" too much. I was a ski racer for many years and learned "cheap" bindings lead to all sorts of injuries. It's hard to get good stuff when you're on a budget, but buy the best you can for your money. And... NEVER get used bindings!

Answer 6

well, if you want the basic basic binding...any Marker binding is usually good quality even their lower price ones. I have Silencers with Rossi Scratch bindings, excellent bindings, though they are a hassle to step into in the deep snow.

Answer 7

i have those skis and i have marker 1100 binding