Question:

What is an easy way to put up temporary wall dividers?

by  |  earlier

0 LIKES UnLike

I'm a college student and I need to find a way to put up temporary walls that will block out some noise if at all. I looked into the folding panels but I think having/building a solid wall is what I'm looking for.

 Tags:

   Report

4 ANSWERS


  1. Other than a folding one, anything else will be more permanent, unless you just want to hang some blankets.


  2. You can frame a wall out of 2x4 and cover it with foam or soundboard that will help deaden the noise.  Measure the ceiling in several places, then cut your studs to the smallest number less 3".  Cut top and bottom plates the length you want the wall and s***w the studs through the plates every 24" with 3" drywall screws.  Stand the wall, and use shims to snug it up.  When you want to take it down, knock the shims out and dismantle the wall.  Hope this helps.

  3. Try a wall of inexpensive bookcases and fill them.  Books, etc will absorb sound, they're temporary, and can move with you when you go!

  4. You can build a wall using the friction fit.  This means that instead of fastening the member to each other, you'll cut them about an 1/8" bigger than the opening allows.  This will make all the framing member secure from falling and then fasten the finishes to the stud ( framing members) just as you would with a normal wall.  

    Also you should consider placing some insulation in between the wall.  This will add to the acoustic value.  If there is going to be door leading into this new room in the house, remember sound travel through air and the space under the door is likely to defeat the purpose of installing the temporary.  Make that gap as small as possible.

Question Stats

Latest activity: earlier.
This question has 4 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.