What is the best way to get s*x wax off your board?

Question

I heard the best way is to use a blow dryer, WD-40.........I want to hear from you now

Answer 1

If  your not a big fan of using chemicals - a blow dryer and some paper towels and a little elbow grease does the trick too.  This is of course AFTER you scrape the majority of the wax off your board.  If you don't have a wax comb, an old cd case, plastic ruler, credit card, anything plastic with a straight edge will work too.

Answer 2

"s*x wax"?  "board"???

Answer 3

wax does not just come in s*x wax

Answer 4

alright, heres the deal:

If you dont already have a wax comb, get one. s*x Wax makes one, so if you can buy s*x wax, you can buy a comb.

One side (the comb side) puts grooves in the wax  once it gets slick, to help with traction.

the other side is like a butter knife or scraper.

To get the wax off your board:

Set you board with top facing up out in the sun to melt the wax a little .Scrape all of the wax off your baord with the comb. You'll notice theres still residue on the board.

Sprinkle some talcum or baby powder on the board and scrape it again. This'll get almost all the wax off it

Lastly, rub some alcohol or wd40 on the board, and wipe it clean. That will leave you with nothing but fiberglass.

This is a must if your going to put on traction pads.

Answer 5

id say my ***!

Answer 6

Poster above me answered it perfectly.

Just a note for any other people who don't get it -

Surfers use wax on their boards. s*x Wax is just a brand name.

Answer 7

well if you want to go the lazy route if its a hot day set it in the direct sunlight and let it melt and than peel it off