Question:

What is the height of stumps?Distance between stumps?

by  |  earlier

0 LIKES UnLike

What is the height of stumps?Distance between stumps?

 Tags:

   Report

7 ANSWERS


  1. 36 inch long & distance between them are 4 inch.


  2. Each stump is 28 inches (71.1 cm) tall with maximum and minimum diameters of 11⁄2 inches (3.81 cm) and 13⁄8 inches (3.49 cm).

    The distace between each stump is 2 1/8 in/5.40cm

  3. Refer below site you will get correct information

    http://cricketforindia.com/Coaching/coac...

    http://cricketforindia.com/CricketLaws/C...

  4. my wickets are around 40 inches and distance bw them is 4 inches

  5. height of each stump (above ground level) 28 inches or 71.1 cms, diameter  not less than 1 3/8 inches or 3.49 cms & not more than 1 1/2 inches or 3.81cms

    length of pitch is 22 yards or 20.12 mtrs or 66 ft.

    distance between two stumps, will depend on bails, overall spacing for each set of stumps should be 9 inches or 22.86cms.

    bail specifications

    --------------

    Overall length:- 4 5/16 inches (10.95cm)

    Length of barrel:- 2 1/8 inches (5.40cm)

    Longer spigot:- 1 3/8 inches (3.49cm)

    Shorter spigot:- 13/16 inches (2.06cm)

  6. The overall width of each wicket is 9 inches (22.9 cm).

    Each stump is 28 inches (71.1 cm) tall with maximum and minimum diameters of 11⁄2 inches (3.81 cm) and 13⁄8 inches (3.49 cm).

  7. 1. Width and pitching

    Two sets of wickets shall be pitched opposite and parallel to each other at a distance of 22 yards/20.12m between the centres of the two middle stumps. Each set shall be 9 in/22.86cm wide and shall consist of three wooden stumps with two wooden bails on top. See Appendix A.

    2. Size of stumps

    The tops of the stumps shall be 28 in/71.1cm above the playing surface and shall be dome shaped except for the bail grooves. The portion of a stump above the playing surface shall be cylindrical, apart from the domed top, with circular section of diameter not less than 1 3/8 in/3.49cm nor more than 1 1/2 in/3.81cm. See Appendix A.

    3. The bails

    (a) The bails, when in position on the top of the stumps,

    (i) shall not project more than 1/2 in/1.27cm above them.

    (ii) shall fit between the stumps without forcing them out of the vertical.

    (b) Each bail shall conform to the following specifications. See Appendix A.

    Overall length:- 4 5/16 in/10.95cm

    Length of barrel:- 2 1/8 in/5.40cm

    Longer spigot:- 1 3/8 in/3.49cm

    Shorter spigot:- 13/16 in/2.06cm

Question Stats

Latest activity: earlier.
This question has 7 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.
Unanswered Questions