Question:

What is the oil/gas ratio for my mercury outboard 2 stroke motor?

by  |  earlier

0 LIKES UnLike

just bought a new/used boat and am not quite sure of the mixture needed. Any help would great thanks.

 Tags:

   Report

4 ANSWERS


  1. the ratio is 50- to 1


  2. if i am not mistaken it is 8 ounces of oil to 6 gallons of gas.

  3. It depends how old it is. 50 to 1 is most common on the black colored cases. But if you have a very old Green or White Merc it is possible to be 25 to 1.   I have a old 1952 that takes 1/2 pint of 30 weight to a gallon. The motor was made before 2 cycle motor oil was around. Go to Antique outboards group on Yahoo and you can learn allot.

  4. When you go to buy oil to mix with gas, you have two different sized bottles.  Those that makd 40 to one and those that make 50 to one.

    40:1 bottles result in a mixure that is 2.5% oil

    50:1 bottles result in a mixture that is 2.0% oil.

    unless the manufacturer specificially recommends either one, it may not matter.  If you want to err on the safe side.  use the 40:1.  

    The worst thing to happen would be to run rich and smoke a little until you replace the tank again.

    wer

Question Stats

Latest activity: earlier.
This question has 4 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.