What should tire pressure be on a 2004 honda cbr 1000rr be on front and back tires?

Question

What should tire pressure be on a 2004 honda cbr 1000rr be on front and back tires?

Answer 1

i am not sure but it should be on the tryer some wear so have a look at the first.

Answer 2

It says on them.

On the sidewalls.

Answer 3

The tire pressure recommended by Honda is 36psi front and 42psi in the rear.  I cannot believe how many people believe the pressure on the sidewall of the tire is what you should use.  The tire states the max pressure, how would say Micheline know what bike you are going to put the tire on.  If anything Honda's recommended pressures are abit high.  If you watch your tire closely you will get a more consistent suspension set-up that you will get to know and understand what you can do with the bike at a given lean angle.  There is normally a sticker on the swingarm telling you what your tire pressures should be.  Nice bike by the way.

Answer 4

wiggy is right.

it'll say on the side of the tires. More than likely 42psi, but it doesnt matter what type of bike. Only matters what tires happen to be on it. if you're going to the track, or you know you're going to be hitting some twisties, you can lower your rear pressure by 5 to 8psi. Just make sure you fill it back up when you're done.

running too low of pressure on a sportbike can make you go through tires very very quickly. they'll start to 'cup' and not wear evenly, which you'll start to feel in the handling.