What would cause the rear tires on My Jeep Liberty to wear on the inside edge?

Question

My rear tires on my Jeep Liberty still have half way decent tread on them. But they are getting very worn and slick on the inside edges. What would cause tires to wear on only the inside edge?

Answer 1

Year? "Camber" "A" Arm Bushings or Wheel Bearings

Answer 2

You might need a wheel balance or an alignment.  Take it to a tire shop where they specialize in finding the problem.

Answer 3

HI

First have those tires been on the back sense they were new? If you don't know then they may have been on the front at one time or another.

If you know they have been on the back sense new then I would guess you need to get the rear end looked at.. it may be barrens or it you have a independent rear end it may need springs or some kind of adjustment.

Good Luck

Tim

Answer 4

your rear wheels have to much negative camber and need an alignment. also you will need to replace you tires.

Answer 5

got to agree w padal

wheel balancing will not wear on one side

and bad shock or spring make tire tread deform

tire wear on one side is bad toe-in  or camber. bushing

at one time  must have ad them in the front

best bet got to wheel alignment shop