Where can i find a set of water hoses for an old perkins 4108 marine diesel engine?

Question

the engine is in a seamaster 23 cruiser.

Answer 1

A.S.A.P. are sure to have the hoses you need. Get the silicon ones if you can,they are much better than the old rubber ones.

Answer 2

I have an old 4107 and have used http://www.diperk.co.uk/ but even better http://www.asap-supplies.com/ as they were very helpful.

Happy boating.

Answer 3

Hopefully you have the old hoses I assume. May try browsing the Inet "perkins 4108 parts" "perkins marine engine parts" Things like that.

I found this;

http://www.onlineboatparts.com/engines.h...

But there are others.

One place you may try and this why you want the old hoses. NAPA AutoParts sometimes they can surprise you what they may have or can get. You can compare your old hoses to be sure it correct.

Answer 4

On my 08 i replaced them at the auto parts store went in the hose section and match the bends and elbows & internal sizes Cut to length<> Also  Did this on my twin 3208 cat> cost $ 35.00 for hoses or $250 from cat  and wait 2 weeks>?

Answer 5

try   Sabre Engines Ltd.   Dorset.......01202 893720

Answer 6

Are you in the UK?  if so try Hindle Ltd in Bradford, main Perkins agents for the north of england.  They may have dusty old ones in the stores.  Or you could try having them made up at:

Dunlop Hiflex,

Howley Park Road,

Morley,

Leeds.

Or alternatively at your local Arco branch.

Answer 7

Try eBay. People sell anything.

Answer 8

THE 4108 HAS DRY LINERS AS OPPOSED TO THE 4107,AND YOU WILL GET THE HOSES FROM EITHER PERKINS,OR ANY MARINE ENGINEERS.GARAGES MAY ALSO CARRY STOCKS,EXCEPT FOR THE HEAT EXCHANGERS,WHICH YOU MAKE YOURSELF,OR GO TO MARINE ENGINEERS.OR ANY MARINISERS.