0 LIKES LikeUnLike
87 ford t bird 5.0L302 WITH MANUAL TREMEC 5 just swapped it I haven't hucked up the neutral safety switch yet but I think it should start without it what could be the reason besides the neutral switch if its the switch some one tell me how to splice it it has a 4 wires for AOD and I do have four connectors on a neutral switch on the clutch pedal so I assume my car has or had a anti theft module that connects to a starter, also t5 has a sensor with two connectors on the the top of the tranny I don't know if that is neutral sensor or something so when I splice should i just send white/pink and white/violet to the sensor and just make a loop of 2 red/blue wires, but there is four connectors on the another set of wires in the tunnel under the car should I connect all of them to it instead conecting to a pedal or send two white and pinks to a pedal and red and blues to same color wire in that connector in the tunnel I know it complicated but is how it is thanks in advance
Tags:
Report (0) (0) | earlier
Latest activity: earlier. This question has 1 answers.