Why is my baby ball pythons eyes grey?

Question

Today I just noticed his eyes were grey,does it mean hes starting to shed?

If he is shedding what do i do???

Answer 1

A gray/cloudy eye means your snake is getting ready to shed. As long as your snake's enclosure has correct humidity there shouldn't be a problem with shedding.

When he is shedding, leave him alone. Usually, as long as your conditions are right, you don't have to assist with shedding. But sometimes shed gets stuck or his eye cap (scale that is shed over the eye) is retained, usually when the humidity is too low. Don't just yank it off. You can try soaking your snake in warm water if any shed is left.

Answer 2

if he runs in 2 thing he is blind but is skin comes off he is shedding if he is shedding let him be

Answer 3

Yes it means he's getting ready to shed. As far as what to do, make sure you're humidity is about 75% and wait about 3 to 5 more days and he should have shed by then.

You'll notice that his eyes should clear up and look normal in about 1-2 days after they get cloudy. This is normal. Then a day or two after that he'll shed.

Answer 4

Hes def. shedding.  and u dont have to do anything just wait a day or two and then he'll have nice shiny scales

Answer 5

BALL PYTHON CARESHEET

Natural History

Ball pythons (Python regius) are found at the edges of the forest lands of Central and Western Africa. They are equally comfortable on the ground and in trees. They are crepuscular, active around dawn and dusk. Called royal pythons in Europe, here in the United States we call them "balls" due to their habit of curling themselves up into a tight ball when they are nervous, their heads pulled firmly into the center. Like most pythons, ball pythons are curious and gentle snakes.

Ball pythons typically reach 4 feet (1.2 m) in length; occasionally there are specimens that reach 5 feet (1.5 m). When properly fed, their bodies become nicely rounded. Like all pythons and boas, ball pythons have anal spurs. These single claws appearing on either side of the vent are the vestigial remains of the hind legs snakes lost during their evolution from lizard to snake millions of years ago. Males have longer spurs than do the females; males also have smaller heads than the females.

Ball pythons, like all pythons and boas, devour a variety of prey in the wild - amphibians, lizards, other snakes, birds and small mammals. They do not eat mice in the wild, however, and do not recognize the mice we offer them as being something edible. Thus, imported wild-caught ball pythons tend to be very picky eaters, at least initially, and drive their owners to distraction in their attempts to get them to eat something.

Ball pythons are reputed to be able to go for extended periods of time without food; wild-caught ball pythons have gone for a year or more without food until finally enticed to eat lizards and other snakes. This is not a healthy trait and must not be a reason for selecting this species. This should also make you suspicious when a pet store tells you that their ball pythons are eating well.

Buying captive-born ball pythons reduces the stress on the threatened populations in the wild and helps ensure you will get a healthy, established eater and a snake already used to contact with humans. Buying from a reputable breeder will ensure that you will get the help and advice you need to assure that your ball feels comfortable and secure enough to eat after you bring it home and let it get settled for a week or so.

With the increased popularity of reptiles as pets there is increased pressure on wild populations. In addition to the more than 60,000 ball pythons that are imported annually, ball pythons are killed for food and their skin is used for leather in their native land. For some reason, despite their low reproduction rate, wild ball pythons are the least expensive pythons on the market, generally wholesaling for under ten dollars. Imported ball pythons also harbor several different types of parasites which may go unnoticed by the novice snake owner. All around, it is better to buy a captive-born hatchling or an established, well-feeding juvenile, sub-adult or adult than an imported ball of any age.

In captivity, young ball pythons will grow about a foot a year during the first three years. They will reach sexual maturity in three to five years. The longest living ball python on record was over 48 years old when it died. Egg-layers, female ball pythons encircle their four to ten eggs, remaining with then from the time they are laid until they hatch. During this three month period, they will not leave the eggs and will not eat.

Getting Started

Selecting Your Ball Python

Choose an animal that has clear firm skin, rounded body shape, clean vent, clear eyes, and who actively flicks its tongue around when handled. All ball pythons are naturally shy about having their heads touched or handled by strangers; a normal reaction is for the ball to pull its head and neck sharply away from such contact. When held, the snake should grip you gently but firmly when moving around. It should be alert to its surroundings. All young snakes are food for other, larger snakes, birds, lizards and mammalian predators so your hatchling may be a bit nervous at first but should settle down quickly.

Selecting an escape-proof enclosure

Select an enclosure especially designed for housing snakes, such as the glass tanks with the combination fixed screen/hinged glass top. All snakes are escape artists; ball pythons are especially powerful and cunning when it comes to breaking out. A good starter tank for a hatchling is a 10 gallon tank (approximately 20"L x 10"W [50 x 25 cm]). A young adult requires a 20 gallon tank, and full adult may require a 30 gallon tank (36" x 12"W [91 x 35 cm]).

Select a suitable substrate

Use paper towels at first. These are easily and quickly removed and replaced when soiled and, with an import, will allow you to better monitor for the presence of mites and the condition of the f***s. Once the animal is established, you can use more decorative ground cover such as commercially prepared shredded cypress or fir bark. Pine and aspen shavings should not be used as they can become lodged in the mouth while eating, causing respiratory and other problems. The shavings must be monitored closely and all soiled and wet shavings pulled out immediately to prevent bacteria and fungus growths. The utilitarian approach is to use inexpensive Astroturf. Extra pieces can be kept in reserve and used when the soiled piece is removed for cleaning and drying (soak in one gallon of water to which you have added two tablespoon of household bleach; rinse thoroughly, and dry completely before reuse). Remember: the easier it is to clean, the faster you'll do it!

Provide a hiding place

A half-log is available at pet stores. An empty cardboard box or upside-down opaque plastic container, both with an access doorway cut into one end, can also be used. The plastic is easily cleaned when necessary; the box can be tossed out when soiled and replaced with a new one. The box or log must be big enough for the snake to hide its entire body inside; you will need to eventually replace it as your snake grows. Ball pythons prefer dark places for sleeping and, as they are nocturnal, they like the dark place during our daylight hours; they also like to sleep in something that is close around them, so do not buy or make too big of a cave for its size. Place a nice climbing branch or two in the tank with some fake greenery screening part of it; your ball will enjoy hanging out in the "tree."

Keeping it warm

Proper temperature range is essential to keeping your snake healthy. The ambient air temperature throughout the enclosure must be maintained between 80-85F (27-29 C)-during the day, with a basking area kept at 90F (32.5 C). At night, the ambient air temperature on the coolest side may be allowed to drop down no lower than 73-75F ( 23-24 C) only if a basking area of at least 80F (27 C) remains available. Special reptile heating pads that are manufactured to maintain a temperature about 20 degrees higher than the air temperature may be used inside the enclosure. There are adhesive pads that can be stuck to the underside of a glass enclosure. Heating pads made for people, available at all drug stores, are also available; these have built-in hi-med-lo switches and can be used under a glass enclosure. You can also use incandescent light bulbs in porcelain and metal reflector hoods to provide the additional heat required for the basking area. All lights must be screened off to prevent the snake from burning itself. All pythons, especially ball pythons, are very susceptible to thermal burns. For this same reason do not use a hot rock. New on the market are ceramic heating elements. They radiate heat downwards, do not emit light, and are reported to be long lasting. Plugged into a thermostat will enable you to adjust the temperature inside the tank as the ambient room temperature changes with the seasons.

Buy at least two thermometers - one to use in the overall area 1" (2.5 cm) above the enclosure floor, and the other 1" (2.5 cm) above the floor in the basking area. Don't try to guess the temperature - you will either end up with a snake who will be too cold to eat and digest its food or one ill or dead from overheating.

Lighting

No special lighting is needed. Ball pythons are nocturnal snakes, spending their days in the wild securely hidden away from possible predators. To make it easier to see your ball during the day, you can use a full-spectrum light or low wattage incandescent bulb in the enclosure during the day. Make sure the snake cannot get into direct contact with the light bulbs as ball pythons are very prone to getting seriously burned. Respect your ball's needs, however, and be sure to provide a hide box, and expect them to use it!

Feeding

Allow your snake to acclimate to its new home for a couple of weeks. Start your hatchling (about 15" in length) off with a single pre-killed one week to 10-day old "fuzzy" mouse. A smaller sized hatchling may require a smaller mouse; try a pre-killed 5-day old. Older ball pythons may be fed larger pre-killed mice or pinkie rats. If you have not had any experience force feeding a snake, you may not want to try it yourself until you have seen someone do it. Force feeding, whether of a mouse or with a formula inserted by catheter and syringe, is very stressful for the snake (and it isn't much fun for the owner!). If your new ball has gone several months without eating and is beginning to noticeably lose weight, take it to a reptile vet or contact your local herpetology society and ask to speak to someone who is knowledgeable about ball pythons and feeding problems. A good inexpensive book that covers some of the tricks to enticing reluctant ball pythons to feed is The Care and Maintenance of Ball Pythons by Philippe de Vosjoli, or the new edition, The Ball Python Manual, by de Vosjoli, Dave and Tracy Barker and Roger Klingenberg.

Water

Provide a bowl of fresh wat

Answer 6

Yes. That means he is getting ready to shed. You don't have to do anything. Just let him shed all of his skin on his own. If he sheds and doesn't shed some skin, or is having trouble shedding then you can buy shedding spray from your pet store that sells reptile products. This loosens their skin for them and lifts it up. Or you can even try soaking him in warm water, wich is good to do anyways. It helps them to shed and its good for their skin.

=)