Question:

Why is my pool filter shooting sand into my pool?

by  |  earlier

0 LIKES UnLike

Inground Hayward super pump

 Tags:

   Report

5 ANSWERS


  1. sounds like to me that the laterals under the sand and rock have holes in them.you would have to have the sand and rock taken out to check all laterals to find the 1or more that have holes


  2. try using the rinse setting on your filter after you back wash this helps to settle the sand down before going back into filter setting.

  3. If it's filter sand, and it's happening all the time,its very likely there's damage in the filter; one of the laterals at the bottom of the tank, or the center pipe assembly may be cracked.  (The filter would need to be emptied and taken apart to dtermine this.)

    If it only happens when backwashing, it may just be some sand in the valve / plumbing.  This can be eliminated or minimized by running the pump with the valve on the "rinse" position for a few seconds before turning it back to "filter".

    It doesn't really have anything to do with the pump (unless the pump is too powerful for the filter and it damaged the filter); the problem is with the filter.

  4. it looks to me like meechum up above pretty much covered it...heres a link to keep with sand filter tips and some info on different types of sand filter media: http://www.swimming-pool-information.com...

  5. to much sand in filter or it needs back washing to reduce pressure

Question Stats

Latest activity: earlier.
This question has 5 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.
Unanswered Questions