Why not give free DIY instructions of how to run your car from convering water in2 hydrogen fuel? share it!?

Question

Yes I'am asking you inventors to reveal u'r knowledge! share it, let d people be educated of this technology...dont w8 for profit..u'r chldren, n grnd chldren, n d entire human race will benifit the knowledge you shared...Hey Daniel Dingel f u'r still alive, and hey where is Stan Mayer (Stan Meyer - Water Fuel Cell...in youtube.com) who was contructed by pentagon who will develop a HAMVEe or whtever it is to build a water fueld car or hybrid?...but hey, separating a HHO from H2O is not expensive.....i can buy you battery for that. and b4 u anser...please research and read, and........understand what u read, and keep on your research!....dont you ever answer f u dnt undstand wht i'm tellen...hate me?.....thank you!...but i dont hate humans, only sepents.

Answer 1

I just answered a similar question regarding this technology, and where to source DIY plans. My old fingers are getting tired from typing, so I have copied that answer here....just because it's relevant!

There are many sites that supply plans for supplemental hydrogen generators. They are very easy to make and install. If used as an addition to existing fossil fuels, the process is extremely cost-effective and beneficial. Toxic exhaust fumes are reduced to a minimum.

I purchased the ebook from the site below last week. It contains over 300 pages of important info regarding this 90 yr old technology, including DIY plans. It is exceptionally well put together, with links to many other resources and books on the subject included. I am in the process of building my own generator, and anticipate building quite a few more for my friends and relatives here in Australia.

Don't listen to the negatives.....do some research and learn the truth!

There is also a company in Canada selling generators ready to fit, at a good price. They offer a 3 year guarantee on their product! Scam?? Hardly.

Good luck with going green.

Answer 2

it's really complex.  diy is just not feasible.

it takes more energy to extract h2  and o2 from h2o than you will gain from consuming BOTH gasses.

Answer 3

anything

Hydrogen is a great option for the concept of free energy.     I built my first hydrogen cell about 5 years ago and now currently run 2 trucks, my home hot water heater, home stove and home generator on hydrogen for free with caught rain water and the help of a $10 solar panel.  I offer a step by step DIY guide to walk anyone interested threw the process. You can find it at http://www.agua-luna.com/hydrogen.html or you can email me.

There are basically 3 safe ways to make and use it... chemically, electrically and molecularly, the first 2 being easier so I'll only discuss them here. The fallowing steps were taking directly out of a DIY guide I offer to those who would like to run their vehicles or home on hydrogen safely. The entire guide is available at http://www.agua-luna.com/guides.html

    On demand h2 generators are a bit different from the Hollywood versions like seen Chain Reaction with Keanu Reeves, that tend to explode violently every time a film is being made. However when used in an on-demand system there is no storage of hydrogen and oxygen in its gas form, only liquid (water) and is only transformed into gas “on-demand” in small cylinder size amounts. It’s actually safer then gasoline as it doesn’t evaporate, creating explosive fumes in the tank like gas.

    Chemically

    1. You’ll need a 6inch x 1ft schedule 40 pvc pipe. With pvc cement glue a cap on the bottom and use a s***w on cap for the top. Drill a small hole (1/4inch or so) in the side close to the top, s******g in a small copper shut off valve. Place a few feet of stranded (food grade is good) flex hose to the valve and into the air intake of your engine (carburetor or fuel injections).

    2. Now crunch up a couple aluminum cans (beer cans, soda cans etc) and drop them into the pvc pipe, along with a couple cups of lye (Red Devil drain opener has lye in it, some Clorox and Drano’s do to).

    3. Then simply add water, s***w on the top and wait a few minutes.

    What happens in simplicity is that aluminum and lye don’t really get along so they battle, and as always the innocent civilians (water H2O) that the most casualties, by giving up its hydrogen and oxygen. This then builds up in the void of the pipe and is ready to be vented into your engine, by opening the valve. You may need to start your engine on gas then switch it off after the hydrogen starts burning.

    Electrical is a bit easier then Chemically.

    1. Simply take a small solar panel 1.5 amps is what I use ($9 at harborfreight.com), connect the 2 wires from the panel +- to 2 conductors (carbon cores of batteries work well, just be careful removing it from the jacket), but any conductive material will work ie. Copper, aluminum, steel, etc.

    2. Drop the wires into a water tank (I use 55gal drums), make sure they don’t touch each other.

    3. Drill a small hole (1/4inch or so) in the side close to the top, s******g in a small copper shut off valve. Place a few feet of stranded (food grade is good) flex hose to the valve and into the air intake of your engine (carburetor or fuel injections).

    4. Then simply add water, s***w on the top cap and wait.

    After a few hours tiny bubbles will form and rise off one conductor (that’s hydrogen) and even smaller bubbles that just looks like foam will rise off the other (oxygen). I don’t remember which likes the positive and which likes the neg hydrogen or the oxygen.

    The third method is more complicated and is what I use for my vehicles. It’s just a modified Joe’s Cell, there’s a step by step DIY guide available to walk you threw the process here http://www.agua-luna.com/hydrogen.html It also covers the other 2 methods described in more detail.

Hope this helped, feel free to contact me personally if you have any questions if you’d like assistance in making your first self sufficient steps, I’m willing to walk you step by step threw the process. I’ve written several how-to DIY guides available at http://www.agua-luna.com on the subject. I also offer online and on-site workshops, seminars and internships to help others help the environment.

Dan Martin

Retired Boeing Engineer now living 100% Off-the-Grid with my family, using Alternative Energy & loving every minute.

for more info visit agua-luna com or email me at [e-mail]

http://www.agua-luna.com

Stop Global Warming, Receive

Answer 4

Converting a car to run on hydrogen gas is beyond the capabilities of most people.  Producing sufficient hydrogen from water to power any car, would require a very large facility, and probably more electricity than your house is wired to handle.  Producing hydrogen from natural gas and water requires high temperatures and specialized catalytic reaction systems that are beyond the capabilities of most people to build or operate.  Compressing the hydrogen produced requires expensive equipment that most people could not afford to buy or maintain.

Had enough, because I can go on from here if you want.