Would this amp be good for two 10W1v2 JL audio subwoofers?

Question

1. 500/5 Hybrid Class D & Class A/B Five-Channel System Amplifier Specifications:

500/5

Rated Power Front Channels: 100 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)

Rated Power Rear Channels: 25 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)

Rated Power Subwoofer Channel: 250 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

THD at Rated Power: <0.03% @ 4 ohm (front and rear ch.)

<0.05% @ 4 ohm (subwoofer ch.)

S/N Ratio (Front & Rear Channels): >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio (Subwoofer Channel): >95 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Frequency Response (Front and Rear Channels): 5 Hz - 30 kHz (+0, -1dB)

Frequency Response (Subwoofer Channel): 5 Hz - 300 Hz (+0, -1dB)

Damping Factor (Front and Rear Channels): >200 @ 4 ohm / 50 Hz

Damping Factor (Subwoofer Channel): >500 @ 4 ohm / 50 Hz

Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS

Dimensions (L x W x H): 19.70 in. x 9.25 in. x 2.36

Answer 1

This is a great amp. if you are trying to use one amp to power your entire system, this is a good choice.  As far as power output on the sub channel, it is not going to play the subs to there fullest capacity, but it will play them just fine. It would work great on a single 12w1 and sound great, but the 2 10&#039;s will be fine. I have an e6450 in one of my cars running 2 sets of jl components and a single 12w1 in a custom enclosure and the sound quality and volume is great. Not too overpowering, but great quality. The box will make all the difference on how well they will sound. Hop this helps