Xbox360 connection?

Question

hello....I was wondering what kinda cables i need to connect my xbox 360 to this tv to get the best quality picture.I have the cable that came with just the basic system and i have the vga cable for computer monitor connectivity..heres the specs and inputs of the tv.....32" widescreen HDTV (16:9 aspect ratio)

high-gloss black finish

built-in digital (ATSC) and analog (NTSC) tuners for over-the-air TV broadcasts (antenna required)

built-in QAM cable TV tuner receives unscrambled programs without a set-top box (cable service required)

CineSpeed 8-bit LCD panel (1366 x 768 pixels)

8-millisecond pixel response time

176°(H) x 176°(V) viewing angle

10-bit digital video processing

DynaLight™ dynamic backlight control for improved contrast and black level

built-in stereo speakers (10 watts x 2)

multibrand remote control

picture settings memory for each video input

6 A/V inputs, including:

2 composite video (1 rear, 1 side)

1 S-video

2 component video (accepts signals up to 108

Answer 1

Assuming your TV has a free HDMI input and your 360 is one with an HDMI port on the back (look at the back of your 360. If there's a small port under where the big AV adapter goes, then you have HDMI. If not, you don't), then run your system at 1360x768 over HDMI.

If neither is true, then go get the 360 VGA cable (I'd recommend the official one, but at 1360x768, you can probably afford to cheap out on it), and run at 1360x768. This is the native resolution of your TV, and the 360's got a great upscaler, especially compared to your TV's. Otherwise, run at 720p over component, but I'd recommend going with HDMI and VGA before just using component so that your TV isn't scaling at all and reducing any possible input lag. Enjoy!

Answer 2

gold plated HDMI cable is the best for a HDTV wen connecting a ps3 or 360 theres no other cables that come close.

Hope that helped.